16" Indestructible Handle Cross Pein Hammer, 2.5 lb. 16" Indestructible Handle Cross Pein Hammer, 2.5 lb. GROZ USA The Groz indestructible handle cross pein Hammer available in a 2.5 lb. head and 16 in. handle (52 - 56 HRC) features an indestructible handle made with four spring steel bars, each measuring 7.1mm in diameter, which run all the way through the full length of the handle to resist overstrike without breaking. The head will not become loose, as steel bars are locked with a steel plate on top of the hammer head, ensuring the head will never get dislodged. The ergonomic, vulcanized rubber-grip handle absorbs impact and vibration, reducing user fatigue. Made from a special grade of ozone-resistant rubber for use in tough outside environments, the textured non-slip grip helps guard against user error. The striking ends are induction-hardened to reach a 52 - 56 HRC-rating, making it especially useful in demolition work where the struck surface is softer than the hammer head. The hi-visibility head adds instant identification on any job site. A steel-reinforced lanyard hole allows for flexibility in storage options and additional opportunity to personalize your tools. Sledge Hammers are used for heavy demolition work in construction environments, railroad, underground mining etc. These are rough use tools that take a lot of beating. No matter how much care you take, incorrectly hitting the hammer on the handle instead of the head cannot be avoided. Conventional Wooden Handle & Fiber Glass handles fall apart not just when overstriked, but in a few hundred strikes even when used with full care. The Groz INDESTRUCTIBLE hammer won't stop no matter what you do to it. Paying a little extra compared to conventional hammers for a lifetime of use works out to a fraction of the cost than what you would spend buying multiple units of conventional hammers for the same job. Groz indestructible handle hammers meet ANSI specifications "Hand tools - heavy Striking tools safety requirements", as well as BS 876 specifications for material, hardness and performance.

16" Indestructible Handle Cross Pein Hammer, 2.5 lb.

Code: 34530
  • FAST SHIPPING

  • 100% ORIGINAL AND QUALITY

  • EASY RETURNS 30 days for free returns

The Groz indestructible handle cross pein Hammer available in a 2.5 lb. head and 16 in. handle (52 - 56 HRC) features an indestructible handle made with four spring steel bars, each measuring 7.1mm in diameter, which run all the way through the full length of the handle to resist overstrike without breaking.

The head will not become loose, as steel bars are locked with a steel plate on top of the hammer head, ensuring the head will never get dislodged. The ergonomic, vulcanized rubber-grip handle absorbs impact and vibration, reducing user fatigue.

Made from a special grade of ozone-resistant rubber for use in tough outside environments, the textured non-slip grip helps guard against user error. The striking ends are induction-hardened to reach a 52 - 56 HRC-rating, making it especially useful in demolition work where the struck surface is softer than the hammer head.

The hi-visibility head adds instant identification on any job site. A steel-reinforced lanyard hole allows for flexibility in storage options and additional opportunity to personalize your tools.

Sledge Hammers are used for heavy demolition work in construction environments, railroad, underground mining etc. These are rough use tools that take a lot of beating.

No matter how much care you take, incorrectly hitting the hammer on the handle instead of the head cannot be avoided. Conventional Wooden Handle & Fiber Glass handles fall apart not just when overstriked, but in a few hundred strikes even when used with full care.

The Groz INDESTRUCTIBLE hammer won't stop no matter what you do to it. Paying a little extra compared to conventional hammers for a lifetime of use works out to a fraction of the cost than what you would spend buying multiple units of conventional hammers for the same job.

Groz indestructible handle hammers meet ANSI specifications "Hand tools - heavy Striking tools safety requirements", as well as BS 876 specifications for material, hardness and performance.

The Groz indestructible handle cross pein Hammer available in a 2.5 lb. head and 16 in. handle (52 - 56 HRC) features an indestructible handle made with four spring steel bars, each measuring 7.1mm in diameter, which run all the way through the full length of the handle to resist overstrike without breaking.

The head will not become loose, as steel bars are locked with a steel plate on top of the hammer head, ensuring the head will never get dislodged. The ergonomic, vulcanized rubber-grip handle absorbs impact and vibration, reducing user fatigue.

Made from a special grade of ozone-resistant rubber for use in tough outside environments, the textured non-slip grip helps guard against user error. The striking ends are induction-hardened to reach a 52 - 56 HRC-rating, making it especially useful in demolition work where the struck surface is softer than the hammer head.

The hi-visibility head adds instant identification on any job site. A steel-reinforced lanyard hole allows for flexibility in storage options and additional opportunity to personalize your tools.

Sledge Hammers are used for heavy demolition work in construction environments, railroad, underground mining etc. These are rough use tools that take a lot of beating.

No matter how much care you take, incorrectly hitting the hammer on the handle instead of the head cannot be avoided. Conventional Wooden Handle & Fiber Glass handles fall apart not just when overstriked, but in a few hundred strikes even when used with full care.

The Groz INDESTRUCTIBLE hammer won't stop no matter what you do to it. Paying a little extra compared to conventional hammers for a lifetime of use works out to a fraction of the cost than what you would spend buying multiple units of conventional hammers for the same job.

Groz indestructible handle hammers meet ANSI specifications "Hand tools - heavy Striking tools safety requirements", as well as BS 876 specifications for material, hardness and performance.

Return Policy


30-Day Satisfaction Guarantee
Return Policy, Limited Warranty and Limitation of Liability
If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (provided the product is undamaged). Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization (RA) number that can be obtained by contacting Groz USA Customer Service Department at 1-888-685-2916. Our customer service hours are Monday through Friday from 8:00 a.m. to 5:00 p.m. (CST). Include a copy of the original order confirmation or packing slip with your RA paperwork as proof of purchase. Returns received without a RA number may be assessed a 15% restocking (processing) fee that will be deducted from any credit due.
 

Shipping Policy


No shipping and handling are charged to customers for standard ground delivery on orders of $150 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Additionally, standard shipping rates will apply for all orders to Alaska and Hawaii. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. If you have any questions, please call our customer service department at 1-888-685-2916